Aluminium Strip Foils(Laminated)

What is ALUMINIUM STRIP FOIL: 
Alminium Strip foil is an excellent barrier to moisture, vapour and gases. It completely blocks the passage of light and entry of unwanted odours. Each Tablet is individually protected.

 Laminated foils can be offered both un-printed and printed strip foil as per customers requirements in Foil/LDPE and Foil/HSL structures.

These are special foils with general lamination of LDPE of 150 gauge or 35-37 micron on the aluminium foils. Used for aluminium table packing as strips both side with printing

Std Foil Gauge Options	Tolerance ( +/-8% )	Min. Bursting Strength
0.025 mm	+/- 0.002 mm	1.5 kg/sq. cm
0.030 mm	+/- 0.0024 mm	1.9 kg/sq. cm
0.040 mm	+/- 0.0032 mm	2.5 kg/sq. cm

Composition of Aluminium Foil : Thickness of Aluminum Foil                                       : in mm                                       : in micron Thickness Tolerance ( +/-8%)                                       : in mm Al. Foil weight (gsm) Pinholes in Al. (no/sqm) max.	Standard Gauge  0.030 30 +/- 0.0024 81(+/-8%) 2	Standard Gauge 0.040 40 +/- 0.0032 108 (+/-8%) 0
Composition of Poly (LDPE) :  Poly thickness (mm) Tolerance (mm) +/-5%   Poly weight (gsm) Bursting Strength -Laminate(kg/cm2)	0.0375 0.001875 34.04+/-5% 2.4	0.05 0.0025 46+/-5% 2.9

For all Aluminium Foil Thickness:
Composition: Aluminium Foil Alloy Aluminium Foil  Finish Temper (Soft / Hard) Bond Strength Lamination Surface Sealing Strength Sealing Surface	AA 1200 /AA 1235 /AA8011 Matt /Bright Soft 200 grams/ 15 mm (min.) Matt / Bright 600 grams / 15 mm. LDPE to LDPE (Poly to poly)
Dimensions: Reel Width : Unprinted                  : Printed Width Tolerance Core Material Core Diameter Reel Diameter / Reel OD Reel OD Tolerance Type of Joint Type of Tape used for Joint	60 - 870 mm 60 - 750 mm +/-0.5 mm Aluminium / Plastic 58/70/76 mm 230-300 mm (standard) +/- 5 mm Single Butt / Double Butt / Lap Joint Paper Tape/ Plastic Tape (Red, Brown or Black colour)
Properties of Printed Side : Colour Ink Adhesion Test Printing Surface Repeat Length Tolerance Registration Tolerance Printing Print Primer Other	1-5 No ink lifting Matt /Bright (non LDPE side) +/- 0.5 mm +/- 0.5 mm As per design / artwork. 0.25 gsm max. Abrasion, water and heat resistant
Recommended Operating Conditions: Temperature ( deg. C) Dwell Time	150 deg C 0.5 seconds (min.)

Notes : 1. Above mentioned specifications are standard specifications. We also offer tailor made specifications as per customers requirement i.e. different combinations of foil and LDPE (poly) / HSL (heat seal lacquer). 2. In case of Printed Designs, customer need to specify unwinding direction   and supply design / artwork of printed designs with colour scheme in soft or   hard form. 3. Normal packing of the product is corrugated cartons / wooden case / Pallets etc. Customer to specify their packing requirements.

Standard Specifications of Aluminium Strip Foil (Foil / HSL) :

Composition of Aluminium : Thickness of Aluminum Foil                                       : in mm                                       : in micron Thickness Tolerance ( +/-8%):                                       : in mm Al. Foil weight (gsm) Pinholes in Al. (no/sqm) max.	0.030 30 +/- 0 .0024 81(+/-8%) 2	0.040 40 +/- 0.0032 108 (+/-8%) 0
Composition of Heat Seal lacquer(HSL) : HSL grammage (in gsm i.e. grams per sq.mtrs)	4 -6	4 - 6

For all Aluminium Foil Thickness:
Composition: Aluminium Foil Alloy Aluminium Foil Finish Temper (Soft / Hard) HSL Coating  Surface Sealing Strength Sealing Surface	AA 1200/AA1235/ AA8011 Matt / Bright Soft Matt / Bright 450 grams / 15 mm (min) HSL to HSL
Dimensions: Reel Width : Unprinted                  : Printed Width Tolerance Core Material Core Diameter Reel Diameter / Reel OD: Reel OD Tolerance Type of Joint Type of  Tape used for Joint	60 - 900 mm 60-750 mm +/-0.5 mm Aluminium / Plastic 58/70/76 mm 230-300 mm (standard) +/- 5 mm Single Butt / Double Butt / Lap Joint Paper Tape/ Plastic Tape (Red, Brown or Black colour)
Properties of Printed Side : Colour Ink Adhesion Test Printing Surface Repeat Length Tolerance Registration Tolerance Printing Print Primer Other	1-5 No ink lifting Matt / Bright (non HSL side) +/- 0.5 mm +/-0.5 mm As per design / artwork. 0.25 gsm max. Abrasion, water and heat resistant
Recommended Operating Conditions: Temperature ( deg. C) Dwell Time	190 deg C 0.5 seconds (min.)

Notes: Notes: 1. We also offer higher (6-8gsm) and lower (3-5gsm) grammage of Heat Seal Lacquer. 2. The lacquer used is food/pharma grade & is safe for contact with tablets /capsules. 2. In case of printed designs, customer to specify unwinding direction and supply artwork of printed designs with colour schemes. 3. Normal packing of the product is corrugated cartons / wooden case / Pallets etc. Customer to specify their packing requirements.